Limit switch for AS-Interface ASI_EKU1-KST

Technical data of limit switches for AS-Interface application

Communication
-      AS-Interface specification:       V2.11, Rev. 1
-      Slave profile:       S-B.A.E
-      Connection:       4-pole sensor connector M12x1,
      contact 1is assigned to ASI+ and contact 3 toASI-
-      Max. network length:       100m (without repeater)
-      Max. cycle time:       10ms (62 A/B slaves)

Ambient Conditions
-      Transport-, storage- and
      Operating temperature:       -25°C ... +55°C

Mechanical Data
-      Operating travel:      6mm

Electrical Data
-      Voltage supply:       26.5...31.6 V, through the AS-Interface line
      Total power consumption:      <= 30 mA
-      Reverse polarity protection:       available

Admissible on-load switching cycles:       1200/h
Mechanical life:       10 mill. switching cycles
Operating force on plunger       10 N
Actuators:       exchangeable and rotatable by 90°
Degree of protection acc. to DIN 40050:       IP65
Construction:       compliant to VDE 0660/200
Ambient conditions       stationary use at weatherproof locations
acc. to DIN IEC 721-3-3       3D6/3Z2/3Z10/3B2/3C2/3S3/3M6